PRODUCT DETAILS

PCL AIR TOOL WHIP HOSE 3/8 STD ADAPTOR 10MM HOSE HA2109
 

Standard Adapter & R 3/8 Male - 0.6m (2ft) - 10mm ID

The vibrations caused in the use of air tools make a coupling connection subject to Health & Safety Regulations. See ISO 4414:1998 and EN 983:1996 for safety requirements covering the installation and use of pneumatic equipment.

A Health and Safety Guide has been produced which covers the use of pneumatic equipment. The Health & Safety Executive Guide HS(G) 39 states "requirements for quick acting couplings apply to most percussive and vibrating air tools, which may be fixed or hand held. If a quick acting coupling socket is fitted at the hose end adjacent to the tool, the plug should not be screwed directly into the inlet port but should be fitted onto a short isolation hose (0.5m to 1.5m long), thus isolating the plug and socket from the tool vibration."

The International Standard (ISO 6150:1998) recommends a minimum of 300mm of flexible hose to be used between a vibrating tool and a quick acting coupling.

 

 

5.65 (Exc. VAT)